Water Tank Capacity CalculatorA free tool on thebackyardscientist.com

Water Tank Capacity Calculator (Litres and Days of Storage)

Convert the internal size of a rectangular or cylindrical tank into litres and cubic metres, in feet or metres, and optionally see how many days of household storage that is.

Tank volume in litres, and days of storage

Use internal sizes and usable water depth, not the outer wall height.

How to calculate water tank capacity in litres

A builder quoting a “1,000-litre tank” and a mason describing a tank as “4 by 4 by 4 feet” are talking about the same idea — volume — in two unit systems. This calculator converts the internal size of a rectangular or cylindrical tank into litres, and, if you like, into a rough number of days of household storage.

The rectangular formula

Volume is length × width × water depth. Then convert to litres:

So a 4 × 4 × 4 foot tank is 64 cubic feet, and 64 × 28.3168 ≈ 1,812 litres. That is the default example on this page. If someone loosely calls a 4-foot cube “2,000 litres”, they are rounding up; the geometry is closer to 1,800.

The cylindrical formula

For a vertical drum-shaped tank, volume is π × radius² × depth. Radius is half the internal diameter. In metres, litres = π × r² × D × 1,000. Switch the shape drop-down to “vertical cylinder” and enter the diameter and the usable water depth. Horizontal cylinders (the sort used as a bowser) have a different, partly filled formula; this page does not try to cover those.

Use internal sizes and usable depth

The number that matters is the water you can actually store and then draw. Measure inside the tank, or subtract wall thickness from an external tape measurement. Do not use the full wall height as the water depth if you will leave a gap at the top (freeboard) so the tank does not overflow, or if the outlet sits above the floor and leaves dead water. Type the usable depth, and the litre figure will already be a usable figure.

Days of storage

A widely used Indian planning number for domestic water is about 135 litres per person per day (the sort of figure that appears in CPHEEO-style supply standards). It is a planning average, not a promise of how your family uses water. A house that also fills a small garden, or that uses a full-flush suite, will be higher; a careful bucket-and-mug household may be lower. The form lets you change both the headcount and the litres-per-person figure.

Four people at 135 litres a day need 540 litres a day. The 1,812-litre 4-foot cube then holds a little over three days of that demand — useful as an overhead buffer if the municipal supply is irregular, not as a long drought reserve. Underground tanks are often sized for more days; the volume maths is the same, the civil design is not, and this page does not size retaining walls or slabs.

How to use the calculator

  1. Choose rectangular or cylindrical, and feet or metres, to match how you measured.
  2. Enter internal length and width (or diameter) and the usable water depth.
  3. Optionally enter how many people the tank should serve and a litres-per-person figure.
  4. Read litres, cubic metres, and days of storage. If you are ordering a ready-made plastic tank, compare with the litre rating printed on the tank, which already is a usable-capacity claim from the manufacturer.

Ready-made plastic tanks are often sold in round litre sizes (500, 750, 1,000, 1,500, 2,000), so you may end up choosing the next standard size above the figure this page gives. Keep a note of the result when you talk to a plumber or a tank seller, and treat it as a measurement check, not a structural design.

Frequently asked questions

How do I calculate water tank capacity in litres?

Use internal dimensions. For a rectangular tank, litres = length × width × water depth × 1,000 when those sizes are in metres. In feet, litres = length × width × depth × 28.3168. For a vertical cylinder, litres = π × radius² × depth × 1,000, with radius and depth in metres.

Should I use the full height of the tank?

Prefer the usable water depth, not the outer wall height. Leave freeboard at the top so the tank does not spill, and remember that an outlet a little above the floor leaves some ‘dead’ water you cannot use.

How much water does a household need per day?

A common Indian planning figure is around 135 litres per person per day (a CPHEEO-style domestic supply standard). Actual use varies with climate, a garden, or a flush-versus-bucket bathroom. The form lets you change this number. The ‘days of storage’ figure is only as good as that assumption.

How many litres is a 4 × 4 × 4 foot tank?

4 × 4 × 4 = 64 cubic feet. 64 × 28.3168 ≈ 1,812 litres of theoretical volume. Usable litres will be a little less if you leave freeboard.

Can I use this for an overhead and an underground tank?

Yes. The volume formula is the same. What changes is structural design, the pump, and whether you want one day’s overhead storage or several days underground. This page only does volume and a simple days-of-use estimate.

Is 1 cubic metre exactly 1,000 litres?

Yes. That is why the metre formula is just length × width × depth × 1,000. A cubic foot is 28.316846 litres; the tool uses that factor.

This is a volume calculator. It does not design foundations, walls, a roof slab or a plumbing system. Use internal, usable depths, and confirm any purchased tank against the manufacturer’s stated capacity.