Granite in India is usually talked about in square feet
A floor, a kitchen counter, or a staircase landing is measured in square feet, then bought as slabs that are often around 8 × 4 ft (32 sq ft) but can be irregular. This calculator divides the finished area by the slab size you type, adds a wastage for cuts and matching, and rounds up to a whole slab count. The default is 100 sq ft, 8 × 4 ft slabs, and 10% wastage: 3.44 exact slabs, 4 slabs to buy, and 110 sq ft of billable quantity. An optional rate — ₹180 per sq ft in the default box, which you must treat as a placeholder, not a quote — then gives an indicative material cost of ₹19,800 on that 110 sq ft. Stone prices move with colour, thickness, finish and city, so overwrite the rate with a number from your yard.
Ten percent wastage is tight for a floor with a lot of cuts, a diagonal layout, or a busy grain that has to be matched. Kitchen counters with cut-outs for a sink and a hob can waste more than a simple rectangle of flooring. Some yards bill the gross slab area they deliver, not only the net finished area; others bill net plus a stated wastage. This page shows both the rounded slab count and the area × (1 + wastage) quantity so you can see either conversation. It does not include skirting, edge polishing, adhesive, or labour.
Thickness, finish and what not to assume
Eighteen or 20 mm flooring slabs and 30 mm counters are product choices. Thickness changes weight and price, not the plan-area count, so it is not an input here. A leather or flamed finish is also a rate question, not an area question. Check for cracks and colour variation at the yard, and try to take all slabs from one lot. Granite is not a waterproofing layer; a wet bathroom still needs a proper coating under or around the stone, which is why the waterproofing calculator is a useful neighbour. For ceramic or vitrified tiles, use the tile calculator instead — the piece size is different, and so is the joint.
This is a shopping estimate, not a stone-yard quotation and not a structural check of a long counter overhang. Heavy counters may need extra support; that is a carpenter or fabricator question. If the architect’s drawing already has a cutting plan, follow that plan rather than this average wastage. The calculator is for the very common query “100 sq ft granite mein kitni slab lagegi” asked in a city yard with a tape and a phone calculator.
Worked examples
1. 100 sq ft, 8 × 4 ft, 10% wastage, ₹180/sq ft: 3.44 exact, 4 slabs, 110 sq ft billable, ₹19,800 indicative. 2. The same 100 sq ft at 15% wastage: 3.59 exact, still 4 slabs, 115 sq ft, ₹20,700. 3. 20 m² (215.28 sq ft) at 10% and 8 × 4: 7.40 exact, 8 slabs. 4. A 40 sq ft counter with 15% wastage is 1.44 exact and 2 slabs — a reminder that a small job can still need a second slab once the sink is cut.
Measure openings carefully, decide skirting separately, and get the rate in writing, including whether polishing and edge work are extra. Then the numbers on this page — area, slab count, billable square feet, and a rate you typed yourself — will match the conversation at the yard instead of fighting it. For a paved outdoor court in concrete blocks rather than stone, switch to the paver-block calculator.
Ask the yard whether transportation, unloading, and stair-carry are in the rate, and whether a broken slab in transit is replaced. Those extras do not change the slab arithmetic, but they do change what you actually pay on the day the stone arrives.