Tile CalculatorA free tool on thebackyardscientist.com

Tile calculator India – floor tiles, boxes, wastage and skirting

Area, tile size aur wastage (seedhi biichawat par 10%, diagonal par 15%) daaliye. Pieces, boxes aur optional skirting nikalte hain — kisi tile brand ke locked tool ke bina.

Tile calculator (floor or wall)

10% straight lay, try 15% for a diagonal lay.

How many tiles for a floor in India, including wastage

A tile calculator is division plus honesty about cuts. Area divided by the face of one tile is the raw count. Straight lays on a rectangular room waste less than a diagonal pattern, which is why this page starts wastage at 10% and invites you to try 15% when the tiler will run tiles at 45 degrees. Brand websites will happily do the same maths in order to sell a named series; here the sizes are the ones Indian yards actually stack — 600 × 600 mm, 800 × 800 mm, 2 × 2 ft (about 609 mm) and 300 × 300 mm bathroom walls.

Worked example: 120 sq ft of 2 × 2 ft tiles

120 sq ft is 11.148 m². A 609 × 609 mm tile is 0.371 m², so the raw count is 11.148 ÷ 0.371 = 30.1 tiles. That is almost exactly 30 tiles, as you would expect from 120 ÷ 4. Adding 10% wastage gives 33.1, which the card rounds up to 34 tiles. At four tiles per box that is 9 boxes. If you switch to a 600 × 600 mm metric tile (0.36 m²), the raw count becomes 31.0 and the 10% figure becomes 35 tiles — a reminder that “2 by 2” and “600 mm” are not the same piece.

Skirting is extra running length, not extra floor area. Type the perimeter in feet (a 10 × 12 ft room has 44 ft of skirting if every wall gets it). Each piece is one tile’s edge length, so 44 ft of 2 × 2 skirting is 44 ÷ 2 = 22 pieces before the tiler cuts around doorways. Those pieces are added on top of the floor count so you do not raid the wastage pile to clad the bottom of the wall.

120 sq ft floorRaw tilesWith 10%
2 × 2 ft30.134 (rounded up)
600 × 600 mm31.035
800 × 800 mm17.420

Hindi mein

120 वर्ग फुट फर्श, 2×2 फुट टाइल, 10% wastage: लगभग 34 टाइल यानी 4 प्रति बॉक्स पर 9 बॉक्स। तिरछी बिछावट पर wastage 15% आज़माएँ। स्कर्टिंग अलग से जोड़ें।

Bathrooms versus rooms

A bathroom floor is usually smaller but cut up by a door, a shower tray and a commode cut-out. Leaving wastage at 10% is often too tight there; 12–15% is kinder. Wall tiles in 300 × 300 mm around a geyser and a mirror also scrap more than a large bedroom floor. Run floor and wall as two calculations rather than one blended area, because the tile size is almost never the same.

How to use

  1. Measure the true tiled area after deducting a built-in cupboard if the floor will not go under it.
  2. Pick the size printed on the box, not the name in the brochure.
  3. Use 10% for a straight room and 15% for a diagonal or a cut-up bathroom.
  4. Set tiles-per-box from the carton (four is common for 600 mm vitrified; bathroom packs differ).
  5. Add skirting length if you need it, then buy a spare box of the same shade lot.

Tile face areas use the nominal millimetre sizes listed. 2 × 2 ft is treated as 609 mm because that is how many Indian “two by two” vitrified tiles are marketed. Wastage percentages are site conventions, not standards. This page does not estimate adhesive or grout tonnes.

Always buy one extra box from the same shade lot even when the calculator already rounded up. Vitrified batches shift colour just enough that a replacement box bought six months later will read as a patch in afternoon light. Keep the spare sealed. If you never open it, many dealers will still discuss a return; if you need three tiles after a future plumbing leak, you will be glad they match.

Frequently asked questions

120 sq ft mein 2x2 kitni tiles?

About 34 with 10% wastage, or 9 boxes of 4.

Diagonal par wastage?

Try 15% instead of 10%.

600 mm aur 2x2 same?

Nahi. 2×2 ft is treated as 609 mm here, which changes the count slightly.

Skirting kaise?

Type the running length in feet. Extra pieces are added on top of the floor count.

Bathroom alag?

Usually yes — smaller area, more cuts, often a different tile size.

Adhesive?

Not on this page. Count tiles first, then follow the adhesive bag’s coverage.

A shopping count. Shade lots, slip rating and wet-area details are not selected here.