How to estimate a bijli bill from appliances or the meter
A unit of electricity in India is one kilowatt-hour (kWh). If a 100-watt bulb runs for 10 hours, it uses 100 × 10 = 1,000 watt-hours, which is 1 unit. The same arithmetic scales to fans, coolers, geysers and air-conditioners. This page adds those appliance-hours for a month (or subtracts two meter readings), then multiplies by the rupees-per-unit you type. It does not download a live tariff from any DISCOM, because those files go stale and state subsidies change mid-year.
Appliance mode
Each row is watts × quantity × hours per day. The monthly units are that daily watt-hour total times the number of days, divided by 1,000. Defaults are starting points, not nameplate gospel: a ceiling fan is often 60–80 W, an LED bulb 7–12 W, a desert cooler around 150–250 W, a storage geyser 2,000 W but only for the minutes it actually heats, and a 1.5-ton AC anywhere from about 1,200–1,800 W on older non-inverter machines to a much lower average on inverter models once the room is cool.
Worked example (the default rows)
Two 75 W fans for 12 hours: 75 × 2 × 12 = 1,800 Wh/day = 1.8 units/day. Six 9 W LEDs for 5 hours: 0.27 units/day. One 1.5-ton AC at 1,500 W for 8 hours: 12 units/day. A 2,000 W geyser for 0.75 hours: 1.5 units/day. A fridge entered as 150 W average for 8 hours: 1.2 units/day. Daily total = 16.77 units. Over 30 days that is 503.1 units. At a flat ₹8 per unit the energy charge is ₹4,024.80. Change the rate box to whatever your last bill shows as the energy charge (or a blended ₹/unit) and the rupee figure updates.
1.5-ton AC versus a cooler versus fans
People type “how many units does 1.5 ton ac consume per hour” every summer because the answer looks like a single number and it is not. At a steady 1,500 W the machine uses 1.5 units per hour. Eight hours is 12 units a day, or 360 units in 30 days — ₹2,880 at ₹8/unit, before any other appliance. A 200 W cooler for 10 hours is 2 units a day (60 units a month). Two fans for 14 hours at 75 W each are 2.1 units a day. The “Summer AC vs cooler vs fan” button fills those three rows together so you can see them on one bill rather than in three separate blog posts. If your inverter AC’s app shows a lower running wattage, type that lower number; the hourly units shrink in proportion.
Meter-reading mode
Your bill’s consumption line is almost always “current reading minus previous reading”. If last month the meter showed 4,300 and today it shows 4,500, you used 200 units, whatever the appliances were. Switch to “From meter reading”, leave those defaults, and at ₹8/unit the energy charge is ₹1,600. This mode is the better check against a printed bill; appliance mode is the better way to decide whether the AC or the geyser is the culprit.
Optional example slabs (dated, editable, not live)
Tick the slab box and the page loads example MSEDCL LT-I(B) total variable charges (energy + wheeling) from the Maharashtra Electricity Regulatory Commission press note for FY 2025-26, published in March 2025 and described there as effective 1 April 2025: ₹5.67 / ₹10.88 / ₹14.07 / ₹15.57 for the 1–100, 101–300, 301–500 and above-500 unit slabs. For 200 units that is 100 × 5.67 + 100 × 10.88 = ₹1,655 of energy, plus whatever fixed charge and duty you type (the same note listed a ₹130 monthly fixed charge for a typical single-phase home). A later review in 2025 was reported to have changed some figures — which is exactly why every rate here is a box you can edit, and why this page will not scrape mahadiscom.in or any other DISCOM portal.
Hindi mein — bijli bill kaise sochen
1 unit = 1 kWh. 1.5 ton AC agar 1,500 watt par ek ghanta chale to 1.5 unit. Din ke 8 ghante, 30 din = 360 unit. ₹8 प्रति यूनिट पर सिर्फ AC की एनर्जी लगभग ₹2,880। मीटर वाली विंडो में वर्तमान रीडिंग में से पिछली रीडिंग घटाएँ — वही यूनिट आपके बिल की शुरुआत हैं. राज्य का टैरिफ यहाँ अपने आप नहीं आता; अपनी दर खुद लिखें, या उदाहरण slabs को अपनी रसीद से सुधारें।
How to use
- Count the appliances you actually run and the hours they run on a typical day, or switch to meter readings from your last two bills.
- Type your own ₹/unit from the bill (a blended rate is fine if slabs confuse you).
- If you want to see telescopic slabs, tick the example box and overwrite every rate from your DISCOM’s latest order or from the tariff annex printed on the bill.
- Compare summer and winter by changing AC and geyser hours rather than inventing a new “seasonal tariff”.
Pair this with the AC tonnage calculator if you are still choosing a machine size, and with the solar payback page if you want to see how many of these units a rooftop system might offset after the central PM Surya Ghar subsidy cap.
Unit definition: 1 unit = 1 kWh, the standard billing unit used by Indian DISCOMs. Example MSEDCL slabs: MERC press note “Retail electricity tariff of MSEDCL from FY 2025-26…”, March 2025, PDF at merc.gov.in, using the total variable column (energy + wheeling) for LT residential I(B). No DISCOM website is queried when you open this page. Geyser and AC wattages are typical nameplate bands, not laboratory measurements of a particular model.