Shuttering CalculatorA free tool on thebackyardscientist.com

Shuttering calculator – 8×4 plywood sheets for a slab

Slab ke length-width aur edge depth daaliye. 8×4 ft plywood (32 sq ft) ke hisaab se sheets nikalte hain, beam/column ka extra area alag se judta hai.

Shuttering / formwork calculator (8×4 plywood)

One new 8 × 4 ft plywood sheet is 32 sq ft. Reused sheets with broken corners cover less — raise wastage if the stack is tired.

How many 8 × 4 plywood sheets does a slab need?

Indian contractors say “shuttering”; textbooks say “formwork”. Either way you are lining the wet concrete with plywood so it holds a shape until it can stand on its own. The most common sheet in an Indian yard is still 8 ft × 4 ft, which is 32 square feet. Count the contact area, divide by 32, add a little wastage, and you have a sheet count you can argue about before the tempo arrives.

Worked example: a 20 × 15 ft slab, 1 ft edge

The soffit — the underside — is 20 × 15 = 300 sq ft. The vertical edges around a 1 ft drop add 2 × (20 + 15) × 1 = 70 sq ft. Total contact area = 370 sq ft. 370 ÷ 32 = 11.56 sheets. Add 5% wastage and you need about 12.1 sheets, so you will practically order 13 new sheets or a carefully reused stack of 13. If the same slab sits on beams, type the extra beam-side area into the extra box; a 12 inch × 12 inch beam that is 20 ft long has roughly 3 × 20 = 60 sq ft of contact if three faces are shuttered (the top is the slab).

Props, spans, runner sizes and the number of times you can reuse a film-faced board are a different conversation. A tired sheet with a chewed corner does not give you 32 sq ft of trustworthy surface. That is why the wastage box exists, and why a “we always reuse 20 times” claim should be treated as marketing until you look at the actual stack.

SlabSoffit + 1 ft edgesSheets with 5%
20 × 15 ft370 sq ft12.1
10 × 10 ft140 sq ft4.6

Hindi mein

20×15 फुट स्लैब, 1 फुट एज: 300 + 70 = 370 वर्ग फुट। 8×4 फुट की शीट 32 वर्ग फुट की होती है, 5% wastage के साथ लगभग 12.1 शीट। बीम-कॉलम का एरिया अलग बॉक्स में जोड़ें।

Beams, columns and openings

Large stair openings or a double-height void should be subtracted from the soffit in your head (or by reducing length and width to the actual shuttered panels) so you do not buy plywood for a hole. Columns are four faces times height times width; add them in the extra box. Do not forget that the first lift of a column often shares shuttering with the footing kicker — a detail that saves a sheet if the supervisor remembers it, and wastes a day if nobody does.

How to use

  1. Enter the slab’s length and width in feet or metres.
  2. Set the edge depth to the slab thickness plus any drop, in the same unit.
  3. Add known beam and column contact area.
  4. Read sheets and round up to a whole sheet, then inspect the reuse stack before you buy everything new.

8 × 4 ft = 32 sq ft is the nominal size of a standard plywood shuttering sheet in India (2.44 × 1.22 m). Contact-area takeoff is basic quantity surveying. This page does not check prop load or deflection.

Use it next to the concrete-mix and slab-steel tools when you cost a whole floor: plywood, cement and TMT are the three lines that usually move a domestic quotation.

Film-faced shuttering plywood is usually ordered in 12 mm or 18 mm. This page does not choose the thickness for you: 12 mm is common on slab soffits with close props, 18 mm is stiffer and heavier. Whatever you buy, count sheets from contact area first, then decide thickness with the supervisor who will actually stand under the deck. Mixing 12 mm leftovers with 18 mm on the same soffit is how uneven slab bottoms appear in the afternoon light after deshuttering.

Frequently asked questions

8×4 sheet kitne sq ft?

32 sq ft.

20×15 ft slab, 1 ft edge?

370 sq ft of contact, about 12.1 sheets with 5% wastage.

Beam kaise jodein?

Type extra contact area in square feet.

Reuse?

Allowed, but damaged sheets cover less than 32 sq ft — raise wastage.

Column?

Four faces × height × width, added in the extra box.

Safety?

Not calculated. Prop spacing needs a supervisor, not this card.

A sheet-count estimate, not a formwork design, prop layout or safety check.