Plaster CalculatorA free tool on thebackyardscientist.com

Plaster calculator – cement and sand for 12, 15 or 20 mm

Area, 12 / 15 / 20 mm thickness aur 1:4 ya 1:6 mix daaliye. Dry-volume factor (default 1.27) dikhta hai aur badla ja sakta hai — 100 sq ft par kitne bags lagenge, yeh card pe turant aata hai.

हिंदी में

Cement calculator for plastering

Dry-volume factor starts at 1.27 (some estimators use 1.33). It is an editable assumption, not a hidden constant.

How much cement is required for 100 sq ft of plaster?

Plaster quantity is a thin-sheet problem: area times thickness gives a wet volume that looks almost too small, then a dry-volume factor and a mix ratio turn it into bags you can actually order. Pages online disagree on that dry-volume factor — you will see 1.27 on some civil blogs and 1.33 on others — so this calculator prints the factor in an editable box instead of burying it in the script.

The steps

  1. Convert area to square metres (1 sq ft = 0.092903 m²). 100 sq ft is 9.290 m².
  2. Choose a thickness. Internal plaster in Indian houses is commonly 12 mm; 15 mm is a richer single coat; 20 mm is a typical figure when people budget a two-coat external or a very uneven wall.
  3. Wet volume = area × thickness in metres. For 100 sq ft at 12 mm: 9.290 × 0.012 = 0.1115 m³.
  4. Dry volume = wet volume × dry-volume factor × (1 + wastage). With 1.27 and 5% extra: 0.1115 × 1.27 × 1.05 = 0.1486 m³.
  5. Split that dry volume by the mix. 1:6 means 7 parts, so cement is one-seventh and sand is six-sevenths. 1:4 means 5 parts.
  6. Cement bags = cement m³ ÷ 0.035 (one 50 kg bag is taken as 0.035 m³).

Worked example (the default: 100 sq ft, 12 mm, 1:6)

Cement = 0.1486 × (1/7) = 0.02123 m³ = 0.61 bags of 50 kg cement (about 30 kg). Sand = 0.1486 × (6/7) = 0.1274 m³ = 4.50 cubic feet. That is why a single 100 sq ft sample wall rarely consumes a whole bag — and why people who plaster a whole house should run the calculator on the full wall area rather than multiplying a rounded “1 bag per 100 sq ft” myth that was probably meant for a thicker or richer mix.

100 sq ft plaster1:6 cement1:4 cementSand at 1:6
12 mm, factor 1.27, 5% extra0.61 bag0.85 bag4.50 cft
15 mm, same factors0.76 bag1.06 bag5.62 cft
20 mm, same factors1.01 bag1.42 bag7.50 cft

Hindi mein

100 square feet area, 12 mm plaster, 1:6 mix, dry-volume factor 1.27 aur 5% extra: lagbhag 0.61 bag cement (50 kg) aur 4.5 cubic feet sand. 1:4 mix par cement ~0.85 bag ho jata hai kyunki cement ka hissa bada hai. Poori house ki walls ka area jod kar chalaayein, 100 sq ft ko andaze se 20 se mat guna kijiye.

1:4 versus 1:6, and internal versus external

A 1:4 mix uses more cement and is often chosen for external plaster or for the first coat on a rough surface. A 1:6 mix is common for internal finishing coats. This page does not tell you which mix your specification requires; it only splits the dry volume the way a site engineer would on the back of a drawing. Ceiling plaster uses the same maths with a different area — do not forget projections, beams and the extra wastage of working overhead.

How this sits next to brick and concrete tools

Brick masonry already consumes mortar in the joints (see the brick calculator). Plaster is a second, separate skin. Adding the two cement totals is the usual way to order bags for a room. For slabs and columns you want the concrete-mix page instead: that uses the 1.54 dry-volume factor that belongs to concrete, not the 1.27 factor on this page. Mixing up those two factors is a common way to buy a third too much (or too little) cement.

How to use

  1. Measure the wall or ceiling area you will actually plaster, after deducting large openings if you prefer (many people plaster into the jambs and do not deduct small windows).
  2. Pick 12, 15 or 20 mm and 1:4 or 1:6.
  3. Leave the dry-volume factor at 1.27, or type 1.33 if that is the house rule on your site, and compare the two bag counts.
  4. Read bags and sand in cubic metres and cubic feet. Order the next half-bag or full bag up, and keep the cement dry.

1 sq ft = 0.092903 m². One 50 kg bag ≈ 0.035 m³ of cement is a standard estimating constant in Indian quantity surveying notes. The 1.27 (sometimes 1.33) dry-volume factor is a rule of thumb for mortar, not a laboratory density. Thickness choices (12 / 15 / 20 mm) follow common site practice rather than a single IS clause that mandates one number for every wall.

Frequently asked questions

100 sq ft, 12 mm, 1:6 mein kitna cement?

About 0.61 bags of 50 kg cement and 4.5 cubic feet of sand, using a 1.27 dry-volume factor and 5% wastage. Switch the mix to 1:4 and cement rises to about 0.85 bags.

Dry-volume factor 1.27 kyun, 1.33 kyun nahi?

Both appear in Indian estimating notes. 1.27 is the default here because it is conservative-but-common for plaster mortar; type 1.33 in the box if your site uses that house rule and compare.

1:4 aur 1:6 mein kaun sa?

1:6 is common internally; 1:4 uses more cement and is often chosen for external work or a first coat. Follow the drawing or the engineer, not this sentence.

Ceiling plaster alag hai?

Formula same hai, area alag. Overhead work par wastage thoda badha sakte ho.

Brick mortar aur plaster same cement?

Nahi. Brick joints and plaster are two different volumes. Add the bag counts from this page and the brick calculator if you want a room total.

Bag size?

Results use 50 kg bags at 0.035 m³ of cement each.

This is a mortar-quantity estimate. It is not a specification of which mix or thickness your wall needs, and it is not a structural or waterproofing design.