What a TMT bar should weigh per metre
Indian site practice almost always quotes a round bar’s theoretical mass as D² ÷ 162 kilograms per metre, where D is the diameter in millimetres. The 162 comes from steel’s density of about 7,850 kilograms per cubic metre written in convenient millimetre units (π/4 × 7,850 ÷ 1,000,000 inverted and rounded). A 12 mm bar is 144 ÷ 162 ≈ 0.889 kg/m. Ten bars of 12 metres are 0.889 × 12 × 10 = 106.67 kg on that formula.
IS 1786 Table 1
IS 1786:2008 (High strength deformed steel bars and wires for concrete reinforcement) publishes a table of nominal masses that tracks the same physics, with the values rounded the way the Bureau of Indian Standards chose them. Common rows include 8 mm at 0.395 kg/m, 10 mm at 0.617, 12 mm at 0.888, 16 mm at 1.58, 20 mm at 2.47, 25 mm at 3.85, 32 mm at 6.31 and 40 mm at 9.86. For 12 mm the table’s 0.888 kg/m makes the same ten bars 106.56 kg — twelve hundredths of a kilogram below the unrounded formula. The card shows both so a dispute at the weighbridge is about rolling tolerance, not about which pocket calculator you opened.
Why this page exists next to the slab-steel tool
The slab steel calculator answers “how many kilograms per square metre for a slab?” and tucks a single-bar helper into a second tab. This page is the other way around: a full IS-aware weight table plus bundle totals, for people who searched “TMT bar weight per meter” or “12 mm rod ka weight.” Fe 415, Fe 500 or Fe 550 grades change strength, not the density used in D²/162.
How to use the page
- Type the diameter stamped on the bar, the length you are cutting (often 12 m as supplied) and how many pieces.
- Read the formula total first; glance at the IS row when the diameter is a standard size.
- Use the optional bundle box if the yard sells a count of bars tied together rather than loose pieces.
- A single bar on a reliable scale that differs wildly from both numbers deserves a conversation with the supplier — small differences can be rolling tolerance.
Need tonnes for a whole floor rather than a bundle? Go back to the slab page. Cement and aggregate to wrap around those bars are on the cement bags and sand-aggregate calculators.
Formula mass D²/162 kg/m from steel density 7,850 kg/m³. Nominal masses quoted from IS 1786:2008 Table 1 (8 mm 0.395, 10 mm 0.617, 12 mm 0.888, 16 mm 1.58, 20 mm 2.47, 25 mm 3.85, 28 mm 4.83, 32 mm 6.31, 36 mm 7.99, 40 mm 9.86 kg/m). A publicly archived copy of the 2008 text is at law.resource.org (IS 1786:2008). Always prefer a current BIS publication if you are writing a specification.
Rust, ribs and mill scale change a scale reading slightly; they do not change the formula you use to order. Do not assume a “12 mm” bar that measures 11.4 mm on a worn micrometer still deserves the 12 mm row — measure first. Cuttings from hooks and bends are extra length, which is why bar-bending schedules add development length the D²/162 card never sees. Keep that distinction when a client compares this shopping weight with an engineer’s BOQ.
A weighbridge ticket for a whole lorry includes rust, moisture, tags and the odd bent bar; it will not match this page to the last kilogram and does not need to. What should match, roughly, is the average of several bars of one diameter. If every 12 mm bar in a bundle is consistently light, that is a supply conversation. If one bar is light and the next is heavy, you are probably seeing ordinary rolling scatter. Keep a note of which bundle went into which slab so a later dispute has a paper trail rather than a memory.